Megatro Free-Standing Wind Tower Mast (MG-FSW005)

Product Details
Number of Blade: as Per Clients
Rotating Shaft: as Per Clients
Stress Way of Blade: Resistance
Diamond Member Since 2010

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 14001, OHSAS/ OHSMS 18001
Find Similar Products

Basic Info.

Model NO.
MG-FSW005
Transport Package
as Per Client Requirement
Specification
AS PER CLIENT
Trademark
MEGATRO
Origin
Shandong, China
HS Code
8503003000
Production Capacity
2000 Sets/Year

Product Description


Megatro Free-Standing Wind Tower Mast (MG-FSW005)
MEGATRO FREE-STANDING WIND TOWER MAST

 
Towers for small wind turbines (up to 100 kW) come in two basic styles, freestanding and guyed. In most home wind system applications, either will do the job of getting the wind generator away from the earth's surface and ground clutter and up into the turbine's fuel: free flowing, non-turbulent winds. MEGATRO provide every types of free-standing wind tower mast as per client design or other technical information. Since 2006, we had exported our wind tower mast to more than twenty countries.
 
There are two basic styles of freestanding towers, monopoles and freestanding lattice towers. Monopole or tube towers are what people think of first because they are currently used for wind farm turbines. These towers are structural tubes that taper from base to the top. Monopole towers are aesthetically very pleasing. Because there is only one leg on a monopole tower, the tower structure uses the most steel, as well as concrete for its foundation, compared to all other tower options. These are expensive towers and installations, and, as such, are not usually considered for most small wind turbine applications.
 
Freestanding lattice towers are three- or four- legged towers, the legs being made of either angle iron or pipe, with cross and horizontal bracing connecting the legs. The tower legs for a 120-foot tower are only about 12 feet apart, from leg to leg. Using considerable concrete and steel, freestanding lattice towers are on the expensive end, but not nearly as expensive as monopoles. Freestanding towers, whether monopole or with legs, have a small footprint on the property where they're installed, meaning they take up very little ground space. This is their primary attraction to most people.
 
Because the legs of a freestanding tower are close together, they require much more steel to keep them from buckling under the loads placed on the tower by the swept area or the rotor and the wind (force) compared to a guyed tower. Then we often design these towers according to clients' different requirements or condition required. However, free-standing tower look very beautiful and most clients take aesthetics as first concern. Till now, our free standing tower severe wind turbine from 300W to 100KW. For bigger wind turbine, we adopt bigger monopole wind mast. If you have any questions, please contact us freely.
 
Other information:
Model No: Based on the customer's requirements
Terms of Payment: L/C, T/T
Port of Loading: Qingdao Port
Delivery Lead Time: One month or based on the customer's needs
Design Requirements:
The design will be also based on the customers' specific requirements.
Minimum Order Quantity: 1 set
Performance Standard
Chinese standard or international standard
Material: Chinese material or as per clients material
Megatro Free-Standing Wind Tower Mast (MG-FSW005)


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier