Megatro Rooftops on The Supporting Columns

Product Details
We Design by Pls & Tower Software: as Per Client Requirements
Accessories 1: Power Fitting
Accessories 2: Cable and Conductor
Diamond Member Since 2010

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Management System Certification
ISO 14001, OHSAS/ OHSMS 18001
  • Megatro Rooftops on The Supporting Columns
  • Megatro Rooftops on The Supporting Columns
  • Megatro Rooftops on The Supporting Columns
Find Similar Products

Basic Info.

Model NO.
MGP- RFT
Transport Package
Export Standard Package
Specification
AS PER CLIENT REQUIREMENT
Trademark
MEGATRO
Origin
Shandong, China
HS Code
73082000
Production Capacity
40000 Tons/Year

Product Description

MEGATRO rooftops on the supporting columns
Megatro Rooftops on The Supporting Columns


This type of antenna supports used on horizontal roofs, as well as on roofs with a slope of up to 30 degrees. Altitude range from 5 to 15 metres.
There are two installation options:
1. On the supporting columns (with sidebar in roof)
2. On its own frame (without opening roof)
This type involves putting on the roof of the building design, the type of tripod, with a height of suspension follow aerials 13 meters. Represents the bearing barrel of three sections: the first and second section-159 mm diameter, they are installing nodes, the upper section with a diameter of 114 mm. On the upper section of the mounted brackets for three trubostoek. The 13-metre tripod mounted on a frame with supporting columns, which are mounted in the roof of the building. Theoretical weight design: 650 kg. Painting-enamel Primer 3 in 1 gray. The height of the flying trunk, trunk diameter, trubostoki for aerials, painting and paint type may change upon agreement with the customer. The design is completed with nuts, washers. Rod and clamps needed for Assembly.

In the same way as the first type is placed on the roof of buildings. Antenna height from 5 to 10 meters. Carrying the trunk of two sections of the same diameter. quickdraws are used. In the top section are mounted brackets for trubostoek. On collapsible is set a square frame, with a side of 2500 mm. Feature of the tripode is that it can be mounted without opening the roof. The frame is mounted on special baskets, which stacked swinging. Data frames allow you to adjust the horizon, relative to the roof. Theoretical weight design: 300 kg. Painting-enamel Primer 3 in 1 gray. The height of the flying trunk, trunk diameter, trubostoki for aerials, painting and paint type may change upon agreement with the customer. The design is completed with nuts, washers, Rod and clamps needed for Assembly


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier